When we talk about towing mistakes. Every month, towing companies and RV carrier centers encounter more messed-up tow trucks than most people would see on the road in their entire lives. We’ve been observing the most commonplace for the past year or two. Sometimes many of them aren’t what you’d expect. Get assistant from towing company Calgary to avoid any towing mistake.
-
Weight Distribution That Is Overcompensating
The weight distribution can be adjusted in a variety of ways. Those chained bars come in a variety of strengths to accommodate various tongue weights. Most people look at a set of hard and fast bars and assume that bigger is better, but this is not the case in this case. A good towing service will check the size of your tongue and make your purchase appropriately. When loaded and equipped with the appropriate bars, the goal is to have the weight bars parallel to the trailer’s body. Excessive rocking (bouncing between the trailer and truck) and, in many cases, loss of steering as well as damage to the hitch and/or body can result from improper weight distribution.
-
Know Your Temperatures
You can keep that powerplant running by keeping an eye on some pressures and temperatures. Every tow rig should have EGT (exhaust gas temps) and gearbox temperature gauges at the very least. Even in inventory engines, high EGTs can melt pistons. Don’t assume that just because you don’t have massive injectors, or a racy tune means you’re safe.
Transmission temperatures must be kept below 210 degrees Fahrenheit. Maximum types of automatic transmission fluid will degrade suddenly at 270 degrees Fahrenheit, needing a complete rebuild. In the pursuit of engine robustness, it’s also important to keep track of fuel and oil pressure, as well as oil temperature.
-
Brakes
You’ve probably seen a few trailers ignite or burst into flames. Trailer brakes are one of the most overlooked and underappreciated structures, despite the important role they play for towing companies. The most popular form is a brake drum design, which employs an electric magnet, cam, and arm mechanism in the hydraulic wheel cylinder’s vicinity. When inspecting or fixing trailer brakes, they might need to be adjusted for wear as well. In contrast to truck brakes, which self-regulate, most trailer brakes do not. That is your responsibility.
-
Vehicle is Overburdened
Every component of a tow rig suffers from the weight of the masses. While most fantastic diesel vehicles have plenty of power to tow more than they should, the truck’s comfort is what holds it back. On hefty tow rigs, broken hitches, blown-out shocks, and worn bushings are all too common. Before each tow, inspect the suspension, hitch, ball mount, and body for signs of wear and tear. Towing services use airbags is a great way to keep your weight in check.
-
Incorrect Ball Size
As ridiculous as it sounds, towing with the incorrect length ball was high on the list of common mistakes made by clients from every towing company. For widespread-type, bumper towing, there are three different length balls—1 7/8-inch, 2-inch, or 2 5/16-inch—and all three are available in different weight ratings. Every trailer’s tongue or coupler should have the required ball length stamped on it.
-
Ball Mount That Isn’t the Right Size
Trailers are built to take you on a journey. The axles, tires, and brakes all take on delivered strain as the vehicle is pitched up or down. Reduced braking ability, increased tire wear, and trailer damage are all possible consequences. Most professional towing services have various length and strength mounts on hand, one for each trailer they tow on a regular basis.
-
Apply lubricant to it
After being used, trailers are frequently parked and forgotten. They, like the vans that tow them, require routine maintenance. Axles should be greased frequently, and bearings should be examined at the same time. Any pivot points where metal touches metal (or rubber bushings meet steel) should be lubricated or replaced if desired. Keep the tongue jack or landing gear lubricated as well. It’s no fun when a jack freezes up, and it always happens at the worst possible time and at the most inconvenient location.
-
“Race” mode towing
Race music is entertaining, but it should never be utilized to tow a trailer up a hill or down a highway on-ramp. Internal engine damage, grenade transmissions, and blown rear-ends are all likely outcomes.
-
Remove it from Overdrive
Reliable towing companies standardize a high rpm and keep the engine in its powerband (but not too high). Every component on a rig’s powertrain will benefit from proper axle gearing for the load and conditions, as well as keeping the transmission out of overdrive during hill climbs or traffic. Keeping the engine revved up under load will reduce wear, keep temperatures down, and maybe boost oil float—not to mention provide more power, making for a less difficult, safer pull.
-
Tire Inflation
It’s crucial to keep track of the tire pressures on both the trailer and the tow truck. Correct tire pressures result in greater gas mileage, fewer tire blowouts, and a better towing experience overall. During the off-season, most trailers lie idle, causing tires to degrade faster than if they had been on the road. Before each journey, assess their situation and stress.
