It is not necessary that whenever you press the login button after entering the credentials, you will be navigated to the routerlogin.net page. Instead, you might incur some errors regarding the wrong login details, no network connection, etc. Hence, there might be plenty of reasons behind the failed Netgear router login page configuration. We will discuss some of them in detail with their easy troubleshooting tips below.
Not connected to the router’s wifi network
In case you are not connected to the router’s wifi network, you will not be able to navigate to the routerlogin.net page. Just disconnect your device from any other wired or wireless connection except for the router’s network and try again.
Reboot your device as well as the router
There could be some internal software glitch which is why you are failing to access routerlogin.net. To troubleshoot this, you can reboot your router as well as the device. Unplug them from the power socket and then plug them back again after a few minutes. Maybe you can resolve your error with this simple power cycle process.
Switch your connection mode
If you think that you face issues with the wired connection, just change the cable and the port and then try again. Also, if the issue lies with the wireless connection, then use any damage-free ethernet cable to establish a wired connection and proceed with your work. You can also try to switch from the 2.4GHz band to the 5GHz band or vice-versa.
Take the service of the Router’s IP address
Most of the time you can use the web address as well as the default IP address to access the Netgear router login page. These can be used as each other’s substitute to access the management console of your router. Here also, if the default gateway routerlogin.net is giving any errors, just switch to the default IP address 192.168.0.1 and press enter. This will surely lead your way to the router login page.
Erase the extra cache and cookies from the browser
Some browsers are cached by the extra cookies and the browsing history. You will fail to access the router’s management page if you are using the cached browser. So, just clear them and then try again to configure the web management page of your Netgear router. If you still fail, then change your browser and use any other compatible browser.
Uninstall the Firewalls, pop-up blockers and the Antivirus software
No doubt you use these software on your device as they improve the condition and working of your device but, they may also block access to the login page. You can try to uninstall them temporarily and try again later with the router login process.
Try connecting using a different device
If the issue lies with your device, just change that and try accessing from any other device. There might be internal issues or any other hardware issue with the device due to which it is not responding up to the mark.
Update the firmware of your Netgear router
The corrupt firmware of the Netgear router will also lead to an error while you access the login page. So, make sure that you keep the firmware of the router updated to the latest version. This process is also helpful in improving the working of the device with more added security features.
Reset the router to factory defaults
You can perform a factory reset in the end on your router if it fails to respond to any of the troubleshooting tips mentioned above. This process will erase all the personalized settings but this is all you have now and maybe it is worth a try. To begin with the router reset process, just press the reset button using a paper clip or any other similar object. Keep holding it for like seven seconds and then release it gently. The router will reboot and you can reconfigure it again using the default credentials.
Conclusion
The troubleshooting steps given above can resolve your issue. But, if you still feel that you are lacking somewhere and the routerlogin.net is still inaccessible then you can contact our team of experts on this issue They will surely provide you with some expert guidance.
