Are you seeking solar panels installation and are wondering, “How are solar panels placed on roofs made of tile?”
There is no doubt about the increasing demand and effectiveness of solar panel systems for Australian homes. Every year, manufacturers are creating panel systems that work better and are cost-effective. In our quest to reduce our carbon footprints, use renewable energy sources and adopt sustainable lifestyles, solar power is a natural option.
In the event that your roofing is constructed out of tiles, you could be contemplating how solar panels could be mounted and installed. Be assured that the professionals from Sunburn Solar know how to handle solar panel installation for rooftops.
How Are Solar Panels Installed on Tile Roofs?
The solar panels are erected on various types of roofs, employing various methods depending on the type of material and pitch of the roof. On flat roofs, freestanding frames are made and installed to maximize the tilt and orientation for energy production. L-shaped brackets are embedded into the roofs of metal and tin roofs without any modifications.
For roofs with tiles, the most commonly used method is to attach mounting brackets on the rafters and then use rails. While tiles must be altered, moved, or replaced, the procedure isn’t as complicated as you imagine.
Let’s take a look at a thorough explanation of how to fix solar panels on tiled roofs.
How to Fix Solar Panels to Tiled Roofing
Pre-Installation Measurement and Inspection
The initial step in every good installation procedure is to take measurements. In person or remotely, the installers will examine your roof and decide on the best location to install depending on the space available as well as the pitch and direction. From there, they’ll measure the roof to determine the best location to install the brackets along with the rail system. Once the roof is evaluated, the position of the inverter as well as wiring are also determined.
Remove Tiles
If you are thinking, “How are solar panels placed on roofs with tiles?”, the initial phases are different from other kinds of roofs. Once the installers have climbed onto your roof, they’ll begin taking off tiles prior to putting in the brackets for mounting.
Based on the dimensions and length of the railing required to support your solar panels, the installation crew will take away tiles to gain access to the roof structure and rafters. Installers may make minor changes to your roof’s cavity to provide more mounting spots for brackets.
Mounting Brackets
After verifying the right spacing and measurements, the installers will then attach the stainless steel brackets to the rafters. After the brackets are installed, the tiles are reinstalled in their original location.
To ensure that the tiles are in a straight line and that the integrity of the roof is preserved, the tiles must be cut or ground to fit the brackets, which have been reinstalled. The team installing the tiles will repair any damaged or broken tiles.
Professionally trained installers will make sure that the mounting brackets are properly secured and that the roof’s waterproofing hasn’t been affected. If required, solar panel installers can also put in waterproofing and flashing around the brackets that have been installed.
The initial task of removing tiles and installing the brackets is specific to tiled roofs and can result in a more expensive installation. However, each roof is distinctive in terms of size, shape, orientation, material, and size. Sunburn Solar is the place to go. At Sunburn Solar, we conduct an exhaustive remote evaluation and give you a fair price prior to beginning any work.
The careful process we use to install your solar panel will ensure that you reap the benefits of your solar panel for many years to come. For more information, call our team right now and receive a price estimate on solar panels installation.
Rail System Installation Rail System
After the brackets are secured, it’s time to set up the rail system. Let’s refer to it as the tile roof solar mount. Aluminum alloy rails are positioned on top of the roof and attached to the brackets. These tracks serve as the anchor point for solar panels.
How to Attach the Solar Panels to the Tiled Roof Materials
After the groundwork is completed, now comes the time to put solar panels on the roof. The panels are joined by clips that are bolted to the panel’s edge and then into the rails that are fixed to the brackets for mounting.
The specially designed brackets permit ease of removal and maintenance in the event that the area beneath the new panels has to be accessible. The solar panels are securely attached to the roofing structure. A total load of tiles should be less than 22 kg per square meter, in line with Australian roofing regulations. If you are in an area that is prone to cyclones (unlikely the case in Australia), there could be a need for bracing.
The space that is created between the panels and the tiles of the roofing also forms a circulation pocket which helps keep the panels cool in the summertime. If you’d like to find out more about the way solar panels can cool your roof, we have written an in-depth guide to explain how they work.
The Electricity Connection
Let us now answer the question, “How do solar panels go about installing on roofs with tiles?” and look at the other aspects of solar panels installation.
When the panels are put in beneath, the electric cables beneath them are joined to one another, creating the “string”. The ‘string’ runs through a tile, then a gap within the roof, and then to the inverter. Installers will not just finish the roof installation but also ensure that all electrical wiring and cables are taken care of.
After the installation is completed, the inverter will no longer be required to connect to the inverter unless it is to perform maintenance or data retrieval. Modern systems can wirelessly transfer all data to an application on a smartphone or a web-based platform.
In the end, the process will take only a couple of days and won’t require any major modifications to your house. The only job that might need to be altered is taking off and altering the tiles to place the mounting brackets, and then creating a route that connects the wire to connect to the inverter. The process of creating a path for wiring is typically done by drilling a small, easy hole.
Can You Get Solar Batteries with Tiled Roofs?
To supplement energy production with solar panels that are installed on their roofs with tiles Many property owners inquire about storage for solar batteries.
Solar batteries are used to store excess energy produced by your panels, and allow them to be used at any time of night, as well as when the sun doesn’t shine. With advancements in the amount of energy stored and price and size reductions, solar storage is becoming more affordable and accessible. They can be easily integrated into existing systems or brand-new ones.
Solar batteries are able to be utilized on any roof since they are generally installed near the inverter as well as in a different location near your home.
Things to Consider When Installing
We’ve explained in detail the way solar panels can be fitted to tiles for roofing. However, prior to moving ahead with the installation of solar panels, there are a few factors to consider to determine if your roofing material is suitable for solar panels.
The most important thing to consider is the quality of your roof. Solar panels can add weight to a roof, and the solar panel installer must determine whether the roof is able to hold the weight of the panels.
The structural integrity can determine the number of panels you can accommodate, and the larger the system, the greater the weight will be.
Solar panels are most effective on roofs that have a pitch of between 10 and 45 degrees. Flat roofs can make use of specially-designed frames or tilting brackets to keep the panels in the right location. However, this may also add to the price of installation.
Depending on the structure of the roof, you could have one slope or a variety of sides. Solar panels work best on roofs that are facing north, as they receive the highest amount of sunlight throughout the daytime. Eastern and west-facing orientations are also acceptable, but south-facing roofs do not work.
Solar panels depend on direct sunlight to generate solar energy. Before you install a solar panel, you must ensure your roof gets as much light as possible. If there is no way to avoid shading in particular regions, the installer will set their panels in the best place.
Get Help from the Experts
If you’re still uncertain about how solar panels can be fitted on a tile roof or want to learn more about Sunburn Solar’s service for solar panels installation, Sunburn Solar is available to assist.
We have installed more than two hundred thousand solar panels, a lot of them on roofs with tiles.
With more than a decade’s worth of expertise, we take care of each roof we install and make sure our customers receive the best performance from their solar panels.
If you’re looking for solar panels, inverters, battery storage or complete solutions, we can help you. To learn more about our services, or to request an appointment, contact us now.
