The question isn’t whether you need an outdoor shower; it’s how to build the perfect one. After all, an outdoor shower will make your backyard patio or deck more inviting and help ensure that each guest feels welcome. To build an outdoor shower that will serve you well over time, consider these eight steps before, during, and after construction.
Step 1: Decide how many people you want to serve
The great thing about an outside shower is that it can accommodate a large number of people. The downside, though, is that if you don’t plan for the right size and number of showers, you might need to squeeze in or limit showers for your guests. Figure out which option will work best for you and your guests. Will it be one large shower or two smaller ones? How many people do you need to accommodate?
Step 2: Determine what features you want
Deciding on your shower’s features will depend on what you want it for. Outdoor showers are great for people who like to camp, and they’re also good for those who don’t have enough space in their homes for a traditional shower. If you’re going to use your utedusch only occasionally, then you may not need any features other than a place to stand and hooks or shelves to store things. If you plan on using it often, then you’ll want some extra features like an outdoor shower head with massage settings, a bench seat, or even a built-in storage unit. But if money is tight and all you need is something basic that can get the job done, then outdoor shower cups are more economical.
/cdn.vox-cdn.com/uploads/chorus_asset/file/23191769/OutdoorShower_0183507.jpg)
Step 3: Discuss permit requirements in your area
Depending on where you live, you might be able to install a cool outdoor shower with little or no interference from the local government. You can also contact your local building department for guidance. They will have a list of all required permits, including any that are not mentioned here.
Step 4: Gather materials and tools
To build an outdoor shower by the pool, you’ll need excavation equipment and materials for building a shower enclosure. If you’re lucky enough to have water on site, then all you need is a garden hose and a temperature controller. But if not, running an underground water pipe will involve some expensive plumbing work. And even then, you may still want to connect your fixtures (showerhead, faucet) to an existing outdoor water faucet.
Step 5: Locate the water source
A ute dusch will have a water source, which can be an existing outdoor faucet or a new one. If you are connecting the shower to an existing outdoor faucet, measure it carefully and buy a pipe that is slightly longer than you need. For example, if your outdoor faucet is 40 inches off of ground level and you want your pipe to connect with it at 45 inches off of ground level, If you’re going to use your outdoor shower only occasionally, then you may not need any features other than a place to stand and hooks or shelves to store things. then you’ll need a 45-inch pipe. You’ll also need a threaded coupling for this installation.
Step 6: Construct the wall forms and pour concrete
Outdoor shower privacy protection is accomplished by installing a fence or building an outdoor enclosure. Ideally, the area should have a clear line of sight between you and your surroundings while still being secluded. It’s important that you provide some type of privacy from neighbors, passersby, and wildlife so you can enjoy your shower experience without interruption.
